CTD Pulvérisation

Triton Mobile

Portable device of injection of Class A additive
From 0,1 to 3%
Pre-mixed flow from 30 to 850 l/mn (LP)

Version «High Pressure» contact us

Characteristics

• Pre-mixed flow from 30 to 850 l/mn (LP)
  Version «High Pressure» contact us
• 3 piston pump 10l/mn (LP - 20 bar)
• Direct current motor regulation
• Concentration selection by + or –

Advantage of the Triton Mobile

• Increased safety
  The pre-mixed (water – Class A additive) is realized directly at the discharge outlets of the trucks. The fire-fighters donʼt need to carry the additive along the water hose because it has already been added during the design phase of the vehicle.
• Reliability
  Compatible with all kinds of fire extinguishing agents to decrease the extinguish time and the water quantity (The damage caused by the water run-off is also reduced). TRITON MOBILE is design to work with Class A additive only and it donʼt need to be flush when the fire is finished.
• Easy and fast to use
  TRITON MOBILE is ready to use when the operator switch on the ON/OFF button. The buttons + & - allow the selection of the additive proportionning rate (0,1% to 3% by step of 0,1%). TRITON MOBILE injects the foam when a nozzle or a monitor is opening by the fire fighters. TRITON MOBILE calculate automatically the quantity of foam depending of the water flow measured by the electromagnetic flowmeter.
• No pressure drop linked to the TRITON MOBILE
  In comparison to a in-line proportionner, TRITON MOBILE allows for a very long water line without any drop in pressure because the pre-mixed is realized directly at the truck (high pressure injection).

Options

• Suction hose 1,5m

Videos