Triton control panel
Automatic foam dosing system from 0,1 to 3%, for a pre-mixed flow from 30 to 1250 l/mn (LP) or 30 to 350 l/mn (HP)
Also exist in manual version.
Characteristics
- Automatic foam dosing system from 0,1 to 3%, for a pre-mixed flow from 30 to 1250 l/mn (LP) or 30 to 350 l/mn (HP)
- 3 piston pump 10l/mn (LP - 20 bar) or 3 l/mn (HP - 40 bar) with pneumatic valve
- Direct current motor regulation
- Concentration selection by + or –
Advantage of the Triton
- Increased safety
The pre-mixed (water – Class A additive) is realized directly at the discharge outlets of the trucks. The fire-fighters don’t need to carry the additive along the water hose because it has already been added during the design phase of the vehicle. In case of additives tanks of the truck go empty, TRITON allows to work on external suction (drums, containers, …).
- Reliability
Compatible with all kinds of fire extinguishing agents to decrease the extinguish time and the water quantity (The damage caused by the water run-off is also reduced). TRITON is design to work with Class A additive only and it don’t need to be flush when the fire is finished.
- Easy and fast to use
TRITON is ready to use when the operator switch on the ON/OFF button. The buttons + & - allow the selection of the additive concentration (0,1% to 1% by step of 0,1%). TRITON injects the foam when a nozzle or a monitor is opening by the fire fighters. TRITON calculate automatically the quantity of foam depending of the water flow measured by the turbine sensor.
- No pressure drop linked to the TRITON
In comparison to a in-line proportionner, TRITON allows for a very long water tube without any drop in pressure because the pre-mixed is realized directly at the truck (high pressure injection).
Options
- External suction on tank, drum, foam trailer, …
- Manifold injection DN50 or DN65
- Hose reel connection kit (valve, …)
- Fiberglass plastic tank 30l or 60l design for TRITON
Equipment Examples
Forestal or Urban truck
Large tank truck