CTD Pulvérisation

Caméléon Mobile

Portable device of injection of Class A and B from 0,1 to 6%
Pre-mixed flow from 50 to 2500 l/mn

Characteristics

• Débit prémélange de 50 à 2500 l/mn
• 3 piston pump 12 or 24 l/mn
• Direct current motor regulation and CAN bus
• Easy pictograph for a quick decision
• Automatic flushing

Advantage of the Caméléon Mobile

• Increased safety
  The pre-mixed (water - additive) is realized directly at the discharge outlets of the trucks. The fire-fighters donʼt need to carry the additive along the water hose because it has already been added during the design phase of the vehicle.
• Reliability
  Compatible with all kinds of fire extinguishing agents to decrease the extinguish time and the water quantity (The damage caused by the water run-off is also reduced).
• Easy and fast to use
  CAMELEON MOBILE is ready to use when the operator switch on the water pump. The selection of the fire type tunes the correct percentage of additive. In this case, all risk of bad dosing is eliminated. CAMELEON MOBILE prime it self and products foam very quickly thanks to the electronic regulation works with the high speed bus (CAN bus). The flushing is also automatic when the fire is finished.
• No pressure drop linked to the CAMELEON MOBILE
  In comparison to a in-line proportionner, CAMELEON MOBILE allows for a very long water line without any drop in pressure because the pre-mixed is realized directly at the truck (high pressure injection).

Options

• Suction hose 1,5m

Vidéo